Hardware

Hardware

Categories

Subcategories

TT-pIR HEadGear™ System - T2600

TT-pIR HEadGear™ System - T2600

The TT-pIR HEadGear features two highly accurate passive infrared (pIR) sensors in a wide-range, dual configuration providing stable and reliable measurements. The lightweight, ergonomic design provides maximum comfort and an open concept that greatly...

Skin Conductance Sensor - SA9309M

Skin Conductance Sensor - SA9309M

Skin Conductance sensor measures the conductance across the skin, and is normally connected to the fingers or toes. Supplied with two finger bands. Specifications Size (spprox.): 37 mm x 37 mm x 12 mm (1.45” x 1.45” x 0.45”) Weight...

Temperature Sensor - SA9310M

Temperature Sensor - SA9310M

Temperature sensor measures skin surface temperature between 10°C – 45°C (50°F - 115°F ). It is supplied with a self adhering band for easy finger placement. Specifications Length (approx.): 152cm (60”) Weight: 10g (0...

Respiration Sensor - SA9311M

Respiration Sensor - SA9311M

The respiration sensor is a sensitive girth sensor worn using an easy fitting high durability woven elastic band fixed with a length adjustable webbing belt. It detects chest or abdominal expansion/contraction and outputs the respiration waveform. The...

EKG™ Sensor with Wrist Straps - T9307M

EKG™ Sensor with Wrist Straps - T9307M

EKG sensor is a pre-amplified electrocardiograph sensor, for directly measuring heart electrical activity. Connects via extender cables for a single channel hook up. EKG wrist straps provide fast, convenient placement of electrodes for measuring EKG from...

Blood Volume Pulse (BVP) Sensor - SA9308M

Blood Volume Pulse (BVP) Sensor - SA9308M

BVP sensor is a blood volume pulse detection sensor (otherwise known as a PPG sensor) housed in a small finger worn package, to measure heart rate & provide BVP amplitude, BVP waveform, HR and Heart rate variability feedback. Specifications Size:...

EMG MyoScan-Pro™ Sensor - T9401M-60

EMG MyoScan-Pro™ Sensor - T9401M-60

EMG MyoScan Pro is a pre-amplified surface electromyography sensor used with the ProComp Infiniti channels C – H for RMS sEMG. Features a range switch in the sensor head to change filter settings between 0 – 400 µV Narrow filter, 0...

EMG MyoScan™ Sensor - T9503M

EMG MyoScan™ Sensor - T9503M

EMG MyoScan is a pre-amplified surface electromyography sensor used with the ProComp Infiniti/ProComp5 Infiniti channels A – B or all FlexComp-Infiniti channels for RAW sEMG. Compatible with Triode electrodes or extender cables for wider placement...

EEG-Z™ Sensor - T9305Z

EEG-Z™ Sensor - T9305Z

EEG-Z is a pre-amplified electroencephalograph sensor with built in impedance checking. Get the ultimate hook up every time with this sensor as it monitors skin impedance (both the reactive and resistive elements) and sensor connection...

EEG-Z3™ Sensor - T7680

EEG-Z3™ Sensor - T7680

EEG-Z3 is a pre-amplified electroencephalograph sensor with built in impedance checking and 3 modes of operation: regular EEG mode (2 Hz – 1 kHz), low frequency mode (0.01 Hz – 1 kHz) for evoked potentials and low frequency applications and...

Bend Sensor - T9550

Bend Sensor - T9550

Bend sensor is small enough to be placed on fingers and wrists to monitor joint motion 180 degrees of flexion. Use sensors back to back to get a 360 degree range. Specifications Length: ~152cm (60”) Weight: ~10g Bend Sensor Type: Variable...

Triode Electrodes - T3402M

Triode Electrodes - T3402M

Triode™ electrode, with standard 2cm spacing of silver silver chloride electrodes, backed with nickel plated brass snaps to prevent corrosion when connected to pre-amplifiers for extended periods. Documents TBA Downloads TBA $(function()...

Uni-Gel Single Electrodes - T3425

Uni-Gel Single Electrodes - T3425

UniGel electrodes, pre gelled single electrodes, for sensitive placements on dry skin. It can be used in place of T3404 single strip electrodes. Sold in packs of 100. Documents TBA Downloads TBA $(function() { // Default $('.example')...

Ag-AgCl Electrodes (x6) - SA3407

Ag-AgCl Electrodes (x6) - SA3407

TBA

Ag-AgCl Fingerband Electrode (x2) - SA2659

Ag-AgCl Fingerband Electrode (x2) - SA2659

TBA

EKG/EMG Ag-AGCI Electrodes (x6) - SA9327

EKG/EMG Ag-AGCI Electrodes (x6) - SA9327

EKG/EMG Ag-AGCI Electrodes - Six per package. For use with the SA9329 wrist straps. Documents TBA Downloads TBA $(function() { // Default $('.example').beefup({ openSingle: true, scroll: true, scrollOffset: -10 }); // Open single $('...

STIM DIN Adapter Cable Kit 55in, 140cm - T9801

STIM DIN Adapter Cable Kit 55in, 140cm - T9801

Sensor cable to connect vaginal/rectal sensors/STIM electrodes to MyoTrac/U-Control Infiniti encoder. Documents TBA Downloads TBA $(function() { // Default $('.example').beefup({ openSingle: true, scroll: true, scrollOffset: -10 }); //...

EKG Extender Cable 27in, 69cm - T8710M

EKG Extender Cable 27in, 69cm - T8710M

The TTL T8710M is a three Snap EKG/EMG lead. 27 inch (69cm) lead. For Thought Technology products. Works with Thought Technology SA9306M EKG/ECG sensor. Procomp2, Procomp Infiniti, Procomp 5 and the Flexcomp. Extend the placement possibilities of the EMG...

TT AV-Sync - T7670

TT AV-Sync - T7670

TT AV-Sync is a highly accurate time-synchronizing device for making measurements of audio and video events produced by a PC. AV Sync is used in evoked and slow cortical potential protocols, and reaction time testing to provide the ability to make...

Force Sensor/Foot Switch Adapter - T9540

Force Sensor/Foot Switch Adapter - T9540

This adapter connects to third party Force sensors of varying sensitivity to measure pressure or force, such as Tekscan Flexiforce and Imaging Technologies Uniforce. It can be used to monitor tactile activity, or as a foot switch for Gait Analysis...