+1(800) 361-3651
Monday - Friday 9am-5pm EST/EDT

Ergonomics

Sensors

content divider
Previous Next

EMG MyoScan-ZTM Sensor

Model: T9503Z

Myoscan-Z sensorMyoScan-Z is a pre-amplified electromyography sensor with built in impedance sensing. Get the ultimate hook up every time with this sensor as it monitors skin impedance and sensor connection. Signal Input Range 0 -2000 µV, Bandwidth 20 Hz – 500Hz. Used with the ProComp/Procomp5 Infiniti channels A – B or all FlexComp-Infiniti channels.

Learn More

EMG MyoScan-ProTM Sensor

Model: T9401M-60 or T9401M-50

Myoscan-Pro SensorEMG MyoScan Pro is a pre-amplified surface electromyography sensor used with the ProComp Infiniti channels C – H for RMS sEMG. Features a range switch in the sensor head to change filter settings between 0 – 400 µV Narrow filter, 0 – 400 µV Wide filter, 0 – 1600 µV Wide filter with 0.1 µV sensitivity. Compatible with Triode electrodes or extender cables for wider placement of electrodes.

Learn More

EMG MyoScanTM Sensor

Model: T9503M

MyoScan SensorEMG MyoScan is a pre-amplified surface electromyography sensor used with the ProComp Infiniti/ProComp5 Infiniti channels A – B or all FlexComp-Infiniti channels for RAW sEMG. Compatible with Triode electrodes or extender cables for wider placement of electrodes. Range of 0 – 2000 µV.

Learn More

EKG Receiver for PolarTM belt

Model: SA9330

EKG Receiver for Polar Belt
Pending CE approval for Europe

The EKG Receiver detects the heart rate of a user from the Polar™ transmitter belt that the user wears around the chest. Polar™ transmitter belt is not provided by Thought Technology and must be purchased separately..

Learn More

Bend Sensor

Model: T9550

Bend SensorBend sensor is small enough to be placed on fingers and wrists to monitor joint motion 180 degrees of flexion. Use sensors back to back to get a 360 degree range.

Learn More

Goniometer adapter & Biometrics Goniometer

Model: T9545

GoniometerThis adapter connects to Biometrics' torsiometers or single and dual axis goniometers, for monitoring joint movement in multiple planes. Ideal choice for Ergonomics and Gait Analysis.

Learn More

Force Sensor/Foot Switch Adapter

Model: T9540

Force Sensor/Foot Switch AdapterThis adapter connects to third party Force sensors of varying sensitivity to measure pressure or force, such as Tekscan Flexiforce and Imaging Technologies Uniforce. It can be used to monitor tactile activity, or as a foot switch for Gait Analysis.

Learn More

Copyright 2016 - Thought Technology Ltd. All rights reserved. - MAR1044